WiFi Power Pack Specifications | |
DK-USB Power Module | Designed for DC input 24V with 1A fuse and DC output with rated voltage of 5.0V and rated current of 500mA. Texture surface. USB is short-circuit. |
Wireless Standards | IEEE 802. 11n, IEEE 802. 11g, IEEE 802. 11b |
Dimensions (WxDxH) | 2.2 x 2.2 x0.7 in. (57 x 57 x 18mm) |
Antenna Type | On-Board |
Frequency | 2.4- 2.4835GHz |
Single Rate | 11n: Up to 150Mbps (dynamic) 11g: Up to 54Mbps (dynamic) 11b: Up to 11Mbps (dynamic) |
EIRP | <20dBm (EIRP) |
Reception Sensitivity | 135M: -70dBm@10%PER 65M: -73dBm@10%PER 54M: -76dBm@10%PER |
Wireless Modes | AP Mode, Router Mode, Client Mode. Repeater Mode, Bridge Mode |
Wireless Functions | Enable/ Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics |
Wireless Security | 64/128/152-bit WEP, WPA/ WPA2 WPA-PSK/ WPA2-PSK |
WAN Type | Dynamic IP/ Static IP/ PPPoE/ PPTP/ L2TP |
DHCP | Server. Client, DHCP Client |
Quality of Service | WMM, Bandwidth Control |
Dynamic DNS | DynaDna, Comexe, NO-IP |
Auto Power Down Mode | 1-5 Minutes Configurable |
VNP Pass-Through | PPTP, L2TP, IPSec (ESP Head) |
Access Control | Local Management Control, Host List, Access Schedule, Rule management |
Firewall Security | DoS, SPI Firewall IP Address Filter/ MAC Address Filter/ Domain Filter IP and MAC Address Binding |
Management | Access Control Local Management Remote Manegment |