Điểm nổi bật
- Production Capacity: 200 Sets/Month
Fusion Splicer KL-300T
Features
Core to core alignment by PAS technology
( PAS: Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface
Specefications
Model: KL-300T
Applicable fibers: SM (ITU-T G. 652), MM (ITU-T G. 651), DS (ITU-T G. 653), NZDS (ITU-T G. 655)
Fiber cleaved length: 8~16mm(Coating diameter: 250µ M)
16mm(Coating diameter: 250 ~ 1000µ M)
Fiber diameter: Cladding diameter: 80 ~150µ M
Coating diameter: 100~ 1000μ M
Fiber Count: Single
Fiber aligning method: Core or clad aligning
Image processing method: Digital
Actual average splice loss: 0.02dB (SM), 0.01dB (MM),
0.04dB (DS), 0.04dB( NZDS)
Splicing time: Typical 9 sec, with standard SM fiber
Splicing mode: 53(templet), 40(user)
Splice loss estimate: More accurate
Return loss: >60dB
Storage of splice result: 4000 results, 20 parameter per result
Fiber display and magnification: 300X(X or Y view), 150X(X and Y view)
Tube heating time: Typical 30 sec
Tube heating mode: 9(templet), 24(user)
Tube heating temperature: Can be adjusted
Applicable Protection sleeve length: 60mm, 40mm and a series of micro sleeves
Tension test: 2N
Electrode life: 2500
No. Of splice/heating with battery: Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen: 5.6 TFT inch color LCD monitor
Image change over: The fiber image is turned upside down
Terminals: USB 1.1 and VGA
Operating condition: 0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50C, respectively, Max. Wind velocity of 15m/s
Power supply: AC 100-240V with AC adapter; Inner Li-battery(6600mAh)
Dimensions: 150mm(L) X150mm (W) X150mm (H)
Weight: 2.7 Kg excluding battery, 3.2 Kg including battery
