Sun Silicom PEG2 PCI-Express x4 Dual Port

Product Description

Sun Silicom PEG2 PCI-Express x4 Dual Port Gigabit Server Adapter

Key features

• Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100
/ 10 Mbps operations Simplex or Full Duplex.
• Host Interface standard support PCI Express 1.0a.
• High performance, reliability, and low power use in Broadcom 5714 / 5715 / 5704 dual
integrated MAC + PHY / SERDES chip controller.
• Ultra deep packet buffer per channel lowers CPU utilization.
• Dual high speed RISC processor per channel for advanced packet classification.
• Hardware acceleration that can offload tasks from the host processor. The controllers can
offload TCP/UDP/IP checksum calculations and TCP segmentation.
• Link Aggregation and Load Balancing:
• Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
• Switch and NIC Independent.
• Failover
• Priority queuing – 802.1p layer 2 priority encoding.
• Virtual LANs –802.1q VLAN tagging.
• Jumbo Frame (9KB).
• 802.x flow control.
• Boot ROM embedded or optional can be used for Boot ROM applications.
• Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
• LEDs indicators for link/Activity/Speed status.
 

Processor

Broadcom BCM5715C

Provided Interfaces

2 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45

Interface (Bus) 

PCI Express

Bus Speed (MHz)

X4 Lane

NOS SOFTWARE SUPPORT

Windows Server 2003 and 2000 ,Windows XP 32- and 64-bit,
Windows NT 4.0 , Linux 2.4.x or later (32- and 64-bit),
FreeBSD 4.x or later, Novell Netware 4.11, 4.2, 5.0, 5.1, 6.0,
SunSoft Solaris 7, 8, UnixWare 7.x, OpenUNIX 8, SCO5.

CDROM driver, utility

Software Included Drivers and Utilities