Điểm nổi bật
Model: MFC23
công suất: 250W
Năng suất: 120kg/h
Kích thước: 275x580x455mm
The model MFC23 is a new food processing machinery which is our new home design, adopt the modern advanced technology. It is provided with various attachments that can cut vegetable and fruit to all sizes of pieces, chips and cubes, as you like. Also the machine is provided with discs that are used for finely grating cheese, almond, chocolate and bread-crumbs.
The machine is good looking, compact in construction easy operable in
operation, and multipurpose. All parts in contact with food are made of
stainless steel, and are in conformity with Chinese hyginene standard.
It''s ideal machinery for food preparation in hotel and restaurants.
Technical Specification:
Voltage: 220v
Frequency: 50Hz
Power: 0.25kw
Disc diameter: 204mm
Production capacity: 120kg/h
Dimension: 275x580x455mm
Weight: 30kg
Attachment Operation (Operation as required)
1. C discs: for slicing and shredding in difference thickness.
| Disc No. | C2 | C3 | C10 |
| Straight Blades | 3 | 2 | 1 |
| Slicing Thickness (mm) | 2 | 3 | 10 |
2. AS disc for shredding vegetable and fruit.
| Disc No. | AS3 |
| Across Section axa(mm) | 3.5X3.5 |
3. F disc for fruit vegetable and fruit.
| Disc No. | F8 & C8 | Remark |
| Across Section axa(mm) + Straight Blade | Chip of squar 8x8 | These two blades need additional purchasing |
4. F10 Discs: for vegetable salads, cubes, ect... must be used with a C disc.
| Disc No. | F10 |
| With a C disc | C10 |
| Cubes(mm) | 10x10x10 |
5. P Discs: for finely grating cheese, bread-crumbs, almonds.
Operation and Maintenance:
1. Before operation, check that the power supply corresponds to that
required by the machine, the external earthing wire is reliable
connected.
2. Install ejector, static devise and movable disc in order base on
selected attachments required. Close the upper lit and lock the handle.
The machine will only start when the lit is closed and the handle is
locked.
3. There are two feed hoppers at the upper lit. In the short hopper,
the material is naturally laid flat and cut lenghthwise. In the tall
hopper, the material is naturally presented vertically. Feed materials
with special feed parts. Do not put your hand or objects other than the
feed parts into the hoppers to avoid injury of your fingers or to damage
the blades.
4. The machine cuts vegetable and fruit only, not meat.
5. After used, open the upper lit, dismantling the disc, wash is and
the inside of the body. The discs should be places on the disc frame,
then close the lit. It's ready for next operation.
Attention: Do not clean with water directly, dry it with a cloth is enough.
Note: This machine is installed with electromotor protect device, it
will stop the power automatically when it overload or under reverse
crics, the electromotor is well protected, then shut down the power,
clear the blockage, reconnect the power and the machine can be started
again.
