Đồng hồ đo vạn năng APECH AM-288C

Mã SP: APECH AM-288C
0

This Multi-meter is an accurate, safe, battery operated




Tư vấn - Hà Nội
  • Song Toàn
    chat qua skype   
    0966399628 -
  • Gia Bao
    0358684686 -

Điểm nổi bật

1. INTRODUCTION
This Multi-meter is an accurate, safe, battery operated, rear tilt-standby, easy to operate handheld instrument with robust protective holster alongside and the adjustable back tilt device with hook-up design. It can offer accurate, reliable measurements of DC/AC Voltage, DC Current, Resistance and DioDE, LED, Transistor, Decibels, Continuity and Capacitance with very high sensitive quality movement, and good - designed circuit, as well as mirrored AL dial plate esc. It has the perfect full overload & mis-used protection via two Fuses, Oxide Varactor & Diodes. It is an instrument for indoor use in the laboratory, school, workshop, hobby and home application.
2. SPECIFICATIONS
Safety Category: IEC61010-1, CAT  II 1000V, CAT III 500V and Pollution Degree 2.
Common Environment: 23ºC ± 5ºC, less than 75% RH.
Temperature ranges: 0 ºC to 40 ºC, 32ºF to 104 ºF for operating condition. -10 ºC to 50ºC, 14 ºF to 122 ºF for Storage condition.
Humidity Scope: operating condition less than 90% RH. Storage condition: less than 80% RH.
Size: 160(W)x 105(D)x 40(H) MM
Weight: 350g approx. (including batteries 2 pcs)
Accessories: one set of Test Leads; one Spare Fuses: 0.5A/250V

Test Function

Range

Accuracy

Remarks

DC V

0-0.25-2.5-10-50-250V-1000V

±3% FSD
±4% FSD.
For 1000V

Input Impendance:
10KΩ/V
Overload protection:
Max.1000V AC/DC
BUT 0.25V/2.5V/10V
250V Max

AC V

0-10-50-250V-1000V

±4% FSD
±5% FSD. For 1000V

Input Impendance:
4.5KΩ/V
Overload protection:
Max.1000V AC/DC
BUT
10V/50V/ only 250V Max
Band with: 40 ~10KHz

DC mA

0-0.1-2.5-25-250 mA, 10A

±3% FSD
±4% FSD

Drop Voltage: 250mV, overload protected by Fuses 0.5A/250V and Oxide Varactor <250v, AC/DC(5s)
No Fuse at 10A Range

Ω

X 1: 0.2~2KΩ Midscale at 20Ω
X 10: 2~20KΩ Midscale at 200Ω
X 100: 20~200KΩ Midscale at 2000Ω
X 1K: 200~2MΩ Midscale at 20KΩ
X 10K: 2K~20MΩ Midscale at 200KΩ

±4% of ARC of Scale Length

Overload protected by the oxide Varactor & Fuse<250V, AC/DC (5s)

Continuity Test

BUZZ

Sounding < 100Ohm

Capacitance (uF)

2000uF(C1)

Approximate Value

Use the Rx1K range

BATT 1.5 Check

0~1.5V: GOOD-?-BAD

±5% of ARC of Scale Length

Load current: 270mA

Transistor check

HFE: 0-1000 via special Hfe socket

Approximate Value

At Ω x 10 range

Led diod check

Via special Hfe socket

Approximate Value

At Ω x 10 range

Decibel check

-22dB~+62 dB (0dB=1mW at 600Ω)

Approximate Value

At ACV ranges via Jacks

POWER Source

Internal Battery: R6P, AA, 1.5V 1pc, 6F22, NEDA 1604, 9V 1pc

0

Sản phẩm khác